Zero gravity hammock chair are good for taking a nap, but sometimes you want the same gentle-swinging experience as you sit up. This is the role filled by hammock chair; a shorter hammock with a wooden bar connects the two ends that are designed to sit sideways. The hammock chair is a close relative to the usual backyard hammock, distinguishing primarily in the way it is intended to be inserted. Instead of being full length like in a normal hammock, the user sees it on a 90 degree Angle with feet hanging one side. A solid bar connects both ends of the hammock grid, making the chair sit firmly around the body.
Tie the ends of a 3-foot rope to each other and secure the loop to a zero gravity hammock chair leg, door handle or other fixed point. Find the net material shuttle with hammock wire and tie the free end of the rope loop. Let the shuttle hang down. Hold a stick horizontally underneath the loop, behind the hanging cord. Wrap the cord around the stick and pull it through the loop and down to the right. Keep wound the cord tight with the thumb while tie a half-stroke around the loop and move the shuttle to the right when you’re done.
Make 20 such loops and knots along the pin and then turn it all over so the shuttle is left from the left instead of the right. Remove the stick from the series of loops and hold it horizontally underneath them. Make another row of 20 loops, this time tie the half-stroke around the small loop loops in the row above instead of the original rope loop. Continue creating lines until you have 40. Load the shuttle and tie the new cable to the old if you drive out. Cut the rope loop and remove it from the zero gravity hammock chair grid.
Cut 40 cables each 36 inches long. Tie each cord to one of the loops in the first or last row of the mesh and tie the free ends of the metal rings – those on the left side of the net to one and the one to the right to the other. Tie a rope to each ring as well, and tie a knot into both rows of 6 inches from the ring. Drill two holes through a 36-inch wooden stick near the ends. Pull the ropes through the holes so that the plug rests on the knots you tied. Hang zero gravity hammock chairs from a rugged support for your choice.zero gravity hammock chair