Then there’s a very good chance that you have one or two rooms with painting wood paneling. At that time the House was built, the wood paneling is very common in this period of time, but now you want to update a more modern look. The best and cheapest way to modernize your panel is with the color. The Picture toolbar is not too difficult, but there are some important steps to take before you begin painting. If you have a rough surface, you will have to sand to start priming and painting. Electric Palm Sander is the best tool for the job, because it can be quickly and efficiently large areas of sand. Make sure that you wear goggles and a mask to keep dust and dirt from getting into the eyes and nose. Sand the panel thoroughly until completely smooth touch
After sanding, you’ll need to thoroughly clean the panels. To do this, you will need to buy a good painting wood paneling designed for the type of project. You can buy these kinds of cleaners at most hardware or paint stores. There are a few vacuums that come in the form of a spray, so all you need to do is to spray the cleaner on and let it sit on the surface for a few seconds, and then wipe the cleaning pad. Because it is a very important step to ensure that the paint adheres properly to clean the panels, as possible. The next step is to ask the oil spill blocking primer. Apply the primer with a brush and roller. Use a brush and cut around corners and trim and Prime into the Groove of the panels.
After the completion of the cutting room with the primer, you can roll out the remaining areas. Primary colors you can have when you buy a coat, so it fits. This makes it easier to cover the primer, when you start painting. Allow the paint to dry completely before you start painting. Most of the primers will dry in a few hours or less. Before you start painting, you will need to caulk any gaps in the Panel after you have finished preparing. Invisible cracks that developed after the primer is applied. Use painting wood paneling to fill the nail holes. I do not recommend trying to caulk the Groove on the Panel. Now you can begin to apply your paint. Apply two coats of a good quality latex paint in the same way that you use a primer; allow to dry thoroughly between coats.Tags: painting paneling color ideas, gray wood paneling